Acer 1800 - Manual (Page 46)

38 Chapter 2
Advanced
The Advanced screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
FIR Ports
Configure the system’s infrared port using options: Disabled and Enabled.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Option
FIR I/O Settings Sets the base I/O address and IRQ for
Infrared port. 3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
DMA Setting for Fast
IR Sets a DMA channel for the printer to
operate in ECP mode. This parameter is
enabled only if Mode is set to ECP. DMA1
DMA3
Phoenix cME FirstBIOS Pro Setup Utility
Information Main Advanced Security Boot Exit
Item specific Help
Infrared Port (FIR) : [Enabled]
Base I/O address/IRQ: [2F8/IRQ 3] [Disabled]
DMA channel: [DMA 3] Infrared port is not
active.
[Enabled]
Infrared port is active
and is user configured.
F1 Help np Select Item F5/F6 Change Values F9 Setup defaults
Esc Exit mo Select Menu Enter Select Sub-Menu F10 Save and Exit