Sony ST-SE200 - Manual (Page 7)

7 GB
Recalling Preset Radio Stations
This tuner lets you recall preset stations directly, by
entering the number of the preset you desire, or by
scanning the preset memory.
Recalling a preset station directly
1
Press BAND to select either FM or AM.
2
Use the number buttons (1-9, 0/10 and >10) to
select the preset number you desire.
To select press
5 5
10 0/10
15 >10 / 1 / 5
20 >10 / 2 / 0/10
3 Repeat steps 1 and 2 to recall other stations.
Scanning the preset memory
1
Press BAND to select FM or AM.
2
Press MEMORY SCAN.
A preset number flashes in the display.
3
Press TUNING + or –.
Press + to scan higher preset numbers.
Press – to scan lower preset numbers.
Each station received will be heard for about four
seconds.
Tuner Operations
4
Press MEMORY SCAN again as soon as the
station you desire is tuned in.
This stops the memory scan.
If a certain preset station cannot be tuned by
scanning
Preset stations with weak signals may be skipped.
Tune in the station manually.
BAND
TUNING (+/–)
BAND MEMORY SCAN
Number buttons