Answering system operation, Call screening/intercept, Connect with the answering system – AT&T 9452 User Manual
Page 26: Voice menu

Call Screening/Intercept
1
Make sure the answering system and the Call Screening feature
are on (see page 22).
2
If you decide to take the call, press
L or l on the handset.
3
If you pick up an extension phone during the announcement and the
announcement does not stop right away, press and release the
telephone switchhook.
Record a Memo
You can record a memo up to four minutes long to store as an incoming
message.
1
Press and release
M.
2
Press a MAIL BOX button to select a mailbox for the memo. After
the beep, speak toward the microphone.
3
To stop recording, press the MAILBOX button again.
Connect with the Answering System
You can access many features of this system remotely from a touch
tone phone.
1
Dial your telephone number.
2
When the system answers, press
#, then enter your
Remote Access Code (preset to 19). The system beeps twice.
3
Within two seconds, enter a remote command (see “Remote Access
Commands” on page 25).
4
Press
* 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
* 5 to hear the menu while remotely connected to the answering system.
ANSWERING SYSTEM OPERATION
24
9452_book_1ATT 10/5/00 3:18 PM Page 24