ATN NVM14 User Manual

Page 29

G. MOUNTING CAMERA/CAMCORDER TO THE

ATN NVM-14

1. Screw Camera Adapter into the front lens of a photographic

camera (thread M52x0.75) or a video camera (use adaptor ring

threaded M37x0.75).
2. Remove the rubber eyecup off the monocular.
3. Connect the adapter with the eyepiece and tighten 3 fixing

screws on the adapter.

H. MOUNTING IR-450 TO THE ATN NVM-14

IR-450 may be mounted on the monocular through the Picatinny

adapter.
1. Install the Picatinny Adapter on one of the monocular rails

(See cl. 3.4.F).
2. Loosen the IR-450 fixing screw.
3. Mount the IR-450 on the Picatinny Adapter and tighten the

fixing screw.

I. MOUNTING THE ATN NVM-14 TO THE pVS-7

HEAD/HELMET MOUNT

To mount the ATN NVM-14 to a head/helmet mount, perform the

following:
1. Attach the PVS- 7 headmount adapter (A) to the rail (B) of

ATN NVM-14.

Figure 3-7

Attaching ATN NVM-14 to pVS-7 Adapter