ATN NVM14 - Manual (Page 24)

2
3.1 MOUNTING pROCEDURES
A. MOUNTING THE ATN NVM-14 TO A HEADMOUNT
To mount the ATN NVM-14 to a headmount, perform the following:
1. Loosen the screw (A). Push the button (B) and insert the
bracket of the NVM-14 into the rail (C) of the headset.
2. Place the headmount with NVM-14 onto a head.
3. Loosen the screw (A) and move the unit along the rail for eye
relief adjustment.
4. The NVM-14 headmount has a flip-up mechanism. Push the
button (D) on the side of mount and lift the unit up until the unit
fixates in the top position. The device in top position will turned
off automatically.
5. Push the same button to lower NVG-7 to viewing position.
Turn the device on for continuation of the operation.
6. The NVM-14 can be placed onto the right or left eye. In or-
der to reajust the monocular for another eye, take the unit off
the headmount adapter, turn the unit other side (for 180º) and
mount it on the headmount adapter through the Picatinny rail
on this side. Push the button (E) and move the device along
the slide-rail (F) for comfortable position.
Figure 3-1
Attaching ATN NVM-14 to Head Mount
A
B
C
D
E
F