ATN NVM14 User Manual
Page 28
6
E. MOUNTING ATN NVM-14 ON TO ATN 3.5X26
SCOpE
There are special adapter for using the ATN NVM-14 with the
ATN 3.5x26 riflescope.
To mount the ATN NVM-14 perform the following:
1. Loosen the the mounting screw (A) of adapter.
2. Mount the adapter onto the back Picatinny rail of the ATN
3.5x26 riflescope.
3. Tighten the mounting screw of adapter.
4. Loosen the screw (B) of adapter. Push the button (C) and
insert the bracket of the NVM-14 into the rail of the adapter.
5. Loosen the screw (B) and move the unit along the rail for
adjustment.
Figure 3-5
Adapter for using ATN 3.5x26 scope
F. MOUNTING THE pICATINNY ADApTER TO THE
ATN NVM-14
Mount Picatinny adapter(A) onto one of the rails on the monocu-
lar. Tighten two fixing screws of the adapter.
Figure 3-6
Mounting the picatinny Adapter to the ATN NVM-14
A
B
A
B
C