Sony DAR-X1R - Manual (Page 73)

Ti
m
e
r Re
cor
d
in
g
GB
73
Recording From Connected
Equipment
You can set the recorder to automatically record
programmes from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 3/DECODER jack of
the recorder (page 38).
When the connected equipment turns on, the
recorder starts recording a programme from the
LINE 3/DECODER jack.
1
Before recording, select HDD or DVD.
If you select DVD, insert a recordable DVD
(see “1. Inserting a Disc” on page 43).
2
Set “Synchro Rec” to “Record to HDD” or
“Record to DVD” in the “Recording” setup
(page 124).
3
Press INPUT SELECT repeatedly to select
“L3.”
4
Select the desired audio signal when
recording a bilingual programme to the
HDD or DVD-RWs/DVD-Rs (VR mode).
Press OPTIONS to select “Line Audio Input,”
and press
. Then select “Bilingual,” and
press .
For details about bilingual recording, see
page 65.
5
Press REC MODE repeatedly to select the
recording mode.
For details about the recording mode, see
page 64.
6
Set the timer on the connected equipment
to the time of the programme you want to
record, and turn it off.
7
Press c z SYNCHRO REC.
The SYNC REC indicator lights up on the
front panel. The recorder is ready to start
Synchro-Recording.
The recorder automatically starts recording
when it receives an input signal from the
connected equipment. The recorder stops
recording when the connected equipment
turns off.
To stop recording
Press x REC STOP or c z SYNCHRO REC,
located beneath the remote control cover.
To cancel Synchro Rec
Press c z SYNCHRO REC.
The SYNC REC indicator on the front panel turns
off.
Recording from connected
equipment with a timer (Synchro
Rec)
+ RW -RW VR -RW
Video
-R VR
+ R HDD
-R
Video
OPTIONS
c z SYNCHRO
REC
INPUT
SELECT
HDD
DVD
REC MODE
x REC STOP
z REC
,continued