Sony DAR-X1R - Manual (Page 110)

GB
110
Listening to the Radio
Preset radio stations in the system’s memory first
(see “Presetting Radio Stations” on page 109).
1
Press FM/AM repeatedly until “FM” or
“AM” appears in the front panel display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to select
the preset station you want.
Each time you press the button, the system
tunes in one preset station.
3
Adjust the volume by pressing 2 +/–.
To turn off the radio
Press HDD or DVD. Or, press [/1 to turn off the
system.
b Note
The HDD and DVD buttons may not correctly function
immediately after turning on the system due to the
initialization. Wait for a while, and press the HDD or
DVD button again to switch the function.
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. Automatic tuning stops automatically when
the system receives a radio station.
To stop automatic tuning manually, press
TUNING + or –.
To listen to radio stations when you know the
frequencies
Use direct tuning in step 2.
1
Press DIRECT TUNING.
2
Press the number buttons to select the
frequency number you want to listen to, press
.
Example: for 98.00 MHz
Press “9,” “8,” “0,” “0,” then press
.
z Hints
• If reception of an FM programme is noisy, press FM/
AM MENU and select “FM MODE” using M/m, then
press . Press M/m to select “MONO,” then press .
There will be no stereo effect, but the reception will
improve. To return, select “STEREO.”
• To improve reception, reorient the supplied aerials.
FM/AM
TUNING + TUNING –
[/1
PRESET + PRESET –
Number
buttons
M/m,
2 +/–
FM/AM MENU
DIRECT
TUNING
DVD
HDD