Sony RDP-NWR100 - Manual (Page 7)

7 GB
G
etting star
ted
Opening the unit cover
1
Unfasten the buckles.
Push the arrowed parts as illustrated and
unfasten the buckles.
2
Open the unit cover.
Connecting a “WALKMAN” to
the unit
1
Connect the WM-PORT plug to the
“WALKMAN.”
 Pull out the WM-PORT plug and insert it up
to the edge of the “WALKMAN” securely.
 Connect the “WALKMAN” after disabling
its HOLD function.

Connect the “WALKMAN” after setting
the [SP Output Optimizer] to [Off] on
your “WALKMAN.”
For information on how to operate, refer
to the instructions supplied with your
“WALKMAN.”
Note

Remove the accessory case or strap from the
“WALKMAN” if attached.
2
Close the unit cover and fasten the
buckles.
Place the unit on a flat surface. Holding
the unit cover with one hand, fasten the
buckles with the other hand until they
click.
Before bringing the unit to the
bathroom, shower room, etc.

Check that two buckles are fastened securely.

Check that the “WALKMAN” is installed in the
unit.