Speaker configuration and volume setup, Creating a virtual center speaker - cso, Using rear speakers as subwoofer - rbe – Sony XAV-60 User Manual
Page 37: Adjusting the speaker volume, Creating a virtual center speaker — cso, Using rear speakers as subwoofer — rbe
37
E:\#Data Disc\4164312221\41643122XAV60EUR\01GB02CD-EUR.fm
masterpage:Right
E:\#Data Disc\4164312221\41643122XAV60EUR\01GB02CD-EUR.fm
masterpage:Right
XAV-60
4-164-312-22 (1)
3
Touch “Custom,” then “Custom Tune.”
The setting display appears.
4
Touch +/– of each speaker to set the
distance between your listening
position and the speakers.
The distance is adjustable in 2 cm (
13
/
16
in)
steps, between 0 and 400 cm (0 and 13
1
/
10
ft).
To restore the default setting, touch “Reset.”
5
Touch “OK.”
The setting is complete.
To return to the previous display, touch “Back.”
Note
The setting is applied only after “OK” is touched.
Speaker configuration and
volume setup
Creating a virtual center speaker
— CSO
To fully enjoy surround sound, it is adequate to
have 5 speakers (front left/right, rear left/right,
center) and 1 subwoofer. CSO (Center Speaker
Organizer) allows you to create a virtual center
speaker even though a real center speaker is not
connected.
1
During disc/USB playback, touch
“Source List,” then
.
2
Touch “Sound.”
The sound setting menu appears.
3
Touch “CSO.”
The options appear.
4
Touch “CSO1,” “CSO2” or “CSO3.”
The setting is complete.
To return to the previous display, touch “Back.”
Note
“CSO” is effective only when “Multi Ch Output” is set to
“Multi” (page 44), as it is effective only for playback of
multi-channel sources.
Using rear speakers as subwoofer
— RBE
RBE (Rear Bass Enhancer) enhances the bass
sound by applying the low pass filter setting
(page 43) to rear speakers. This function allows
rear speakers to work as a subwoofer even if it is
not connected.
1
During reception/playback, touch
“Source List,” then
.
2
Touch “Sound.”
The sound setting menu appears.
3
Touch v/V to scroll, then “RBE.”
The options appear.
4
Touch “RBE1,” “RBE2” or “RBE3.”
The setting is complete.
To return to the previous display, touch “Back.”
Adjusting the speaker volume
You can adjust the volume level of each
connected speaker.
The adjustable speakers are “Front R” (Front
Right), “Front L” (Front Left), “Surround L”
(Rear Left), “Surround R” (Rear Right) and
“Subwoofer*.”
* Adjustable only when a subwoofer is connected and
“Subwoofer” is set to “ON” (page 42).
1
While the unit is off, touch “Source
List,” then
.
2
Touch “Sound.”
The sound setting menu appears.
3
Touch v/V to scroll, then “4.1ch
Speaker Level.”
The setting display appears.
4
Touch the speaker, then +/– to adjust
the level.
Repeat this step to adjust all speaker volume.
To restore the default setting, touch “Reset.”
To return to the previous display, touch “Back.”
12:00
15
ATT
Reset
OK
Back
Position Tune
Top
100
100
100
100
100
(cm)
Front L
Surround L
Subwoofer
Front R
Surround R
12:00
ATT
Reset
Back
4.1ch Speaker Level
Top
0