Listening to music, Bluetooth connecting / playing back – Sony WLA-NWB1 User Manual

Page 11

WLA-NWB1 [GB] 2-895-766-13(1)

Listening to music

Bluetooth Connecting / Playing back

You can listen to music of the Walkman connected to this unit on the

Bluetooth receiving device (headset, etc.).
Before starting operation, complete pairing this unit and the

Bluetooth receiving device (page 8).

Set the Bluetooth receiving device to “Connectable” for the
Bluetooth connection.

(See the operating instructions supplied with

the Bluetooth receiving device.)

Connect this unit to the Walkman then turn on the Walkman.

This unit’s indicator status will vary as follows, and the Bluetooth

connection between this unit and the Bluetooth receiving device

is established.

Indicator flashes twice: Power is on



Indicator flashes (at about 1-second intervals): Connecting in process



Indicator flashes twice: Connecting successful



Indicator flashes slowly (at about 5-second intervals): Connecting

If the Bluetooth connection is not established within 5 minutes,

this unit automatically turns itself off. In this case, turn it on

again by pressing and holding the power button for about 2

seconds.

Note

If you want to establish the Bluetooth connection with a Bluetooth device that

is paired before either of the last two devices recognized, turn on the unit and

establish the Bluetooth connection from the Bluetooth device while the unit’s

indicator flashes slowly from 10 to 13 times (for about 10-13 seconds). If the

problem persists, pair the devices again.

Continued

