Specifications, Connect external equipment cables to the tv, Restore the tv to the non-tilted position – Sony SU-PW3M User Manual
Page 15
15
(GB)
Specifications
Unit: mm (inches)
Weight: 15.0 kg (33 lb 1 oz)
Design and specifications are subject to change without
notice.
PLATE UNIT
SPEAKER
Speaker unit
10 cm
(
2)
Impedance
4
Ω
Max. power
50 W
2
Connect external equipment
cables to the TV.
3
Restore the TV to the non-tilted
position.
1
Unfasten the screws tightened at the outer
sides of the bottom left and right hooks of the
Mounting Rack in step 5 of procedure 1.
2
Hold the bottom left and right of the TV and
pull it out toward you so that the support
braces are unlocked from the bottom hooks
on the Mounting Rack.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
3
Grasp the protruding part of the support
braces with your other hand and slide it
upward so that the support braces and the
TV are restored in the untilted position.
4
Tighten the securing screws.
5
Confirm that all the cables connected to the
TV are not twisted or pinched, and then plug
in the mains lead.
WARNING
• Be sure two or more people do this work.
• Be careful not to pinch your hands or fingers.
3
670 (26
3
⁄
8
)
420 (16
17
⁄
32
)
520 (20
1
⁄
2
)
505 (19
29
⁄
32
)*
MOUNTING RACK
480 (18
29
⁄
32
)
79
(3
1
⁄
8
)
85.5
(3
3
⁄
8
)
44
(1
3
⁄
4
)
* When changing the position of the woofer speaker for
installing a 50-inch TV: 590 (23
1
/
4
)
ш 90 (3
5
⁄
8
)