Sony SU-WL700 - Manual (Page 5)

5
(GB)
Be careful not to subject the Display to
shock during installation.
If the Display is exposed to shock, it may fall or break apart. This
may cause injury.
Be sure to install the Display on a wall that
is both perpendicular and flat.
If you fail to do so, the Display may fall and cause injury.
After proper installation of the Display,
secure the cables properly.
If people or objects get tangled with cables, this may result in injury
or damage to the Display.
Do not allow the AC power cord or the
connecting cable to be pinched.
If the AC power cord or the connecting cable
is pinched between the unit and the wall or is
bent or twisted by force, the internal
conductors may become exposed and cause a
short circuit or an electrical break. This may
cause a fire or an electric shock.
Be careful not to hurt your hands or fingers
during the installation.
Be careful not to hurt your hands or fingers when installing the
Wall-Mount Bracket or the Display.
The screws needed to secure the Wall-
Mount Bracket to the wall are not supplied.
Use the appropriate screws for the wall material and structure when
mounting the Wall-Mount Bracket.
Before assembling
• Have the Display’s operating instructions at hand before
installation.
• Refer to the assembly sheet when there is a mark
appended to the procedure.
• Arrow direction in the assembly sheet indicates the
front face of the Display.
• Be sure to have a Phillips screwdriver that fits the screws
prior to the assembly.
Design and specifications are subject to change without
notice.
Preparation
Installation procedure differs depending on your Display.
Follow the instructions in this manual referring to the
assembly sheet.
Specifications
Dimensions:
mm (inches) a 445 (17 5 / 8 )
b 406 (16)
c 320 (12 5 / 8 )
d 364 (14 3 /
8
)
Weight: 4 kg (9 lb 142 oz)
d c
b
a