Sequence mode – Axis Communications AXIS 223M User Manual

Page 30

AXIS 223M - Live View Config

Click the Add button to open the External Video Source Setup dialog, and make the

necessary settings. Enter the IP address or host name of the external video source you wish

to add. Depending on the external source, select either MPEG-2, MPEG-4 or Motion JPEG

as the type of video stream you want to receive.

Note:

Ensure that you have installed the correct decoders.

Example of a path to an external video source:

Sequence Mode

The Live View page can be configured to cycle through the internal and selected external

video sources, in order, or at random.

Select the desired video sources and enter the time in seconds to display each

source (up to 59 minutes). Click Save.

The Sequence buttons that appear on the Live View page are used to start and stop

the sequence mode.

Please see the online help

for more information.

http://192.168.0.125/axis-cgi/mjpeg/video.cgi