Axis Communications AXIS 223M - Manual (Page 25)

25 AXIS 223M - Audio
Depending on the selected encoding, set the desired Bit rate (audio quality). The settings
depend on the available bandwidth and the required audio quality, i.e. a high bit rate
setting requires more bandwidth.
The AXIS 223M can be set to trigger an event if the incoming sound level rises above, falls
below or passes the set value. The Alarm level is set between 0-100%.
Audio Output
If the sound from the speaker is too low or high, adjust the output gain for the active
speaker attached to the AXIS 223M. When satisfied with the settings, click Save, or click
Reset to revert to the previously saved settings.