Acura 2008 TL - Manual (Page 110)

110 Navigation System
Changing the DVD
NOTE:
The system’s database is stored on a
removable DVD. The system will not
work without the DVD. Ensure the door
remains closed at all times.
1. Remove the DVD while the ignition
switch is in the Accessory (I) position
or in the ON (II) position.
2. Locate the control unit. It is in the
trunk on the right side, behind the
plastic door.
3. Push the Eject button. The DVD will
automatically come out and an error
message will display on the screen.
This is normal.
4. Pull the DVD straight out. Hold the
DVD by the edges. Fingerprints,
scratches, or other contamination on
the playing surface can make the
DVD unreadable.
To install the Navigation DVD, make
sure the white label is facing up. Slide
the DVD into the slot. The DVD is
automatically pulled into the control
unit. Make sure you close the door.
NOTE:
• The system will not play movies or
other video/audio discs.
• Never “sneak preview” a newer
white labeled DVD in the system
unless you plan to keep it. The system
cannot automatically “revert back”
to a prior version DVD. If you must
revert to a previous version DVD
your dealer for assistance.
•
A PC card is not supplied. The PC card
cannot be used to play audio files.
PC card slot
Client Assistance
after loading a newer version, see
slot is for factory use only. This slot
Keep the door to the navigation
PC Card
control unit closed at all times.
2008 TL
Main Menu