ADC Fiber Optic Wall Box FL1000 Series - Manual (Page 3)

10/07
•
103743AE
Fiber
Optic
Panels
70 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
W
all
Mount
Panel
Solutions
FL1000 Series Fiber Optic Wall Box
Wall Mount Boxes (One Door)
How to order
1. Select wall box type
2. Select 6pak adapters (with or without fiber)
3. Select 6pak adapter/connector type (choose placement in the wall box)
4. Select splice tray with chip
5. Select quantity of cable clamps (0–9)
6. Select quantity of compression fittings (0–9)
7. Select quantity of bonding grounding kits (0–9)
1 For a fully loaded 12-position wall box,
fill in spaces A & B with 6pak adapter/
connector type. Populate fields C & D
with ”N”.
2 For a fully loaded 24-position wall box,
fill in spaces A, B, C & D with 6pak
adapter/connector type.
3 LC connectors and adapters double the
capacity of the panel by terminating two
fibers at each adapter.
Catalog Number
FL1- __ __ __ __ __ __ N N __ - __ __ __ 0
* For FTTX wall box applications, please refer to the OmniReach ™ FTTX Solutions for Multi-Dwelling
Unit Applications Catalog #102761AE.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
A B C D
Wall Box Type
A 12-position termination/splice
B 24-position termination/splice
C 48-position splice-only
6pak Adapter/
Connector Type
1, 2
Multimode
N None/NA
9 SC
6 LC 3
Singlemode
N None/NA
7 SC ultra polish
J SC angled polish
2 FC ultra polish
8 LC ultra polish 3
Z LC angled polish 3
Accessories
(Enter the desired
quantity 0–9 above the
corresponding accessory.)
Cable clamp
Compression fittings
Bonding grounding kit
Splice Tray with Chip
1 Bare fusion
2 Heat shrink
(single fiber fusion)
3 Mechanical (mass fusion)
N None
6pak Adapters
3 Adapters with pigtails
4 Adapter-only
6 Singlemode or multimode
62.5/125 µm 6-fiber stranded
softwall bundle (12-fiber
for LC)
9 Singlemode or multimode
62.5/125 µm 12-fiber ribbon
I Multimode 50/125 µm
stranded softwall bundle