2 ai net2, 3 peg link mode, Peg link mode [auto – Asus M2N-SLI User Manual
Page 86
-22
Chapter : BIOS setup
4.4.2
AI NET2
F1:Help ↑↓ : Select Item
-/+: Change Value
F5: Setup Defaults
ESC: Exit →←: Select Menu
Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Enable or Disable LAN
cable check during POST.
AI NET2
POST Check LAN Cable
[Disabled]
POST Check LAN2 Cable
[Disabled]
Pair
Status
Length
LAN1(1-2)
Open
N/A
LAN1(3-4)
Open
N/A
LAN1(5-6)
Open
N/A
LAN1(7-8)
Open
N/A
LAN2(1-2)
Open
N/A
LAN2(3-4)
Open
N/A
LAN2(5-6)
Open
N/A
LAN2(7-8)
Open
N/A
Phoenix-Award BIOS CMOS Setup Utility
Advanced
POST Check LAN Cable [Disabled]
POST Check LAN2 Cable [Disabled]
Enables or disables checking of the LAN/LAN2 cable during the Power-On
Self-Test (POST). Configuration options: [Disabled] [Enabled]
4.4.3
PEG Link Mode
Select Menu
Item Specific Help
Enhance performance on
PCIE serial graphic card.
PEG Link Mode
PEG Link Mode
[Auto]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
PEG Link Mode [Auto]
Allows you to enhance the performance of your PCI Express graphics card.
Configuration options: [Auto] [Disabled] [Normal] [Fast] [Faster]
Setting to [Fast] or [Faster] may cause your system to be unstable. If this
happens, revert to the default setting [Auto].