Haltech Platinum PRO PLUG-IN Nissan 350Z Z33 (HT055016) - Manual (Page 3)

Notes
PLATINUM Pro Plug-in Nissan 350Z / Z33
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management System. This fully
programmable Plug and Play product opens the door to virtually limitless performance
modification and tuning of your vehicle. Programmable systems allow you to extract all
the performance from your engine by delivering precisely the required amount of fuel
and ignition timing that your engine requires for maximum output under all operating
conditions.
This quick start guide will walk you through installation of the Platinum Pro ECU into a
vehicle. This guide is accompanied by the full service manual located on the software
CD provided with the ECU that you or your tuner will need to refer to before completing
your installation and configuration. The Manual is included in the software which can be
downloaded from the Haltech website
www.haltech.com
Supported Vehicles
The Platinum Pro Plug-in Nissan 350Z / Z33 ECU supports the following:
• Nissan 350Z / Z33 (2003 - 2006)
• Nissan Skyline V35 (2003 - 2006)
• Infinity G35 (2003 - 2006)
* Does not support VQ35HR
Platinum Pro Plug-in Nissan 350Z / Z33 Kit Includes
• Haltech Platinum Pro Plug-in ECU
• Vacuum hose for connection of Internal MAP sensor to intake manifold
• USB Cable
• Software CD
• Quick Start Guide
Loaded Basemap
Your Platinum Pro Plug-in has been programmed with a basemap to suit a
Nissan 350Z / Z33 running a VQ35DE engine using the internal ECU MAP sensor.
Alternatively, a basemap using the OEM MAF Sensor as a load reference is available
in the following folder for you to upload into your ECU:
C:\Users\\Documents\Haltech\ECUMaps\Nissan\Z33
Please ensure you load, modify and check the corresponding basemap for your
application before attempting to start the vehicle.