Haltech Platinum PRO PLUG-IN Nissan 350Z Z33 (HT055016) User Manual
Page 15
4.
If the internal MAP sensor is to be used install the supplied vacuum line from the
engine intake manifold to the barb on the rear of the Haltech ECU.
Connect the USB cable and auxiliary connector to the ECU, and re-install into the
vehicle.
Figure 5 – Haltech ECU Installed in OEM Location
5.
Re install the glove compartment.
Figure 6 – Glove compartment re-installed
The
Haltech CAN Network
The Haltech CAN network allows for simple and effective expansion in ECU capability
and functionality without having to go to the trouble of wiring in a whole new computer.
Expansion is made possible by the addition of multiple expansion devices that
communicate to the main ECU via a Control Area Network (CAN).
Installation time and costs are kept to a minimum as all expansion devices are
powered up from the main ECU via the pre-terminated connection cable that comes
with each expansion device.
Simply connect the device directly to the 8 pin CAN connector on the rear of the ECU
or connect using an optional Haltech CAN Hub (order as part # HT059990) if multiple
expansion devices are required).
Each expansion device is pre-programmed with a unique ID code which allows it to
be recognised on the network and work correctly first time every time.
For current available expansion devices please go to our website at
Figure 15 – Haltech ECU connected to a Racepak Dash
Figure 16 – Haltech ECU connected to 5 Auxiliary CAN based devices