Haltech Platinum PRO PLUG-IN Nissan 350Z Z33 (HT055016) - Manual (Page 16)

ECU PINOUT
LOOKING INTO ECU CONNECTOR
Figure 17 – Platinum Pro Plug-in 350Z / Z33 ECU Pinout
2. Disconnect the OEM ECU from the main wiring harness, by raising the locking lever.
Remove the 2 x 10mm nuts securing the OEM ECU to the vehicle,
Remove the ECU and mounting bracket assembly.
Figure 3 – OEM ECU on Mounting bracket
3. Remove the 3 x 10mm nuts securing the OEM ECU to the mounting bracket,
Remove the ECU
Secure the Haltech ECU to the Haltech mounting kit using the provided captive
nuts and screws. Attach the assembled ECU and mounting to the original OEM
mounting bracket using the original 3 x 10mm nuts. as seen below
Figure 4 – Platinum Pro Plug-in ECU mounted on OEM mount