Ferguson D-990 HX - Manual (Page 29)

25
ENGLISH
Digital Audio Setup
The options included in Digital Audio
Setup are: { Digital Output } and { LPCM
Output }.
A
In ‘Audio Setup Page’, use   keys to
highlight { Digital Audio Setup }, then
press .
B
Use   keys to select an option.
C
Press  to enter into the submenu.
D
Press   keys to select a setting.
 { Digital Output }
Select this if you connect to a
multichannel decoder/receiver.
– { RAW } - Select this if the connected
device has a built-in multichannel decod-
er that supports one of the multichannel
audio format (Dolby Digital, MPEG-2).
– { PCM Only} - Select this if the con-
nected device is not capable of decoding
multichannel audio. The DVD player will
convert the Dolby Digital and MPEG-2
multichannel signals to PCM (Pulse Code
Modulation).
– { Off } - To deactivate the digital audio
output. For example, if you use the AUDIO
OUT sockets to connect to a TV or stereo
system.
Helpful Hint:
 If { Digital Output } is set to { All }, all audio
settings except MUTE are invalid.
 { LPCM Output }
Select this if you connect to a PCM
compatible receiver. Discs are recorded
at a certain sampling rate with the higher
sampling rate, the better sound quality.
– { 48K } - Select this if the playback disc
is recorded at a sampling rate of 48kHz.
– { 96K } - Select this if the playback disc
is recorded at a sampling rate of 96kHz.
– { 192K }
HDMI Audio Setup
This function allows you to set the digital
audio to output via HDMI cable.
A
In ‘Audio Setup Page’, press   to select
{HDMI Audio Setup}, then press .
{AUTO} - To enable the automatic HDMI
digital audio to output.
{PCM} - To disable the automatic HDMI
digital audio to output. Output is now
plain stereo PCM.
B
Use   keys to select a setting and
press OK to confirm.
DVD Setup Menu Options