Ferguson Ariva HDplayer 210 - Manual (Page 12)

8
Wired IP Sharing Router
TV
CAUTION!
DO NOT OPEN RISK OF ELECTRIC SHOCK ACHTUNG!
NICHT ÖFFNEN LEBENSGEFAHR
UWAGA!
NIE OTWIERAĆ RYZYKO PORAŻENIA
WiFi Router
TV
CAUTION!
DO NOT OPEN RISK OF ELECTRIC SHOCK ACHTUNG!
NICHT ÖFFNEN LEBENSGEFAHR
UWAGA!
NIE OTWIERAĆ RYZYKO PORAŻENIA
ENGLISH
Connections
Optional: Connecting Ethernet
network
Ethernet 100Mb network
A
Connect the Ethernet RJ-45 cable to LAN
port as shown on the above illustration.
B
Wait a moment until DHCP will configure
network connection.
Helpful hints:
 If there is no DHCP server in your network
you can manually configure Ariva IP
address - “Fix IP (manual)” menu item.
Optional: Connecting WiFi network
WiFi 802.11g/n network
IMPORTANT!

You need dedicated WiFi USB dongle
for wireless connection. This dongle
is optional accessory and may be sold
separatly.
A
Connect dedicated WiFi USB dongle
to USB port as shown on the above
illustration.
B
Enter “Setup” > “Network” > “Wireless
Setup” > “Infrastructure (AP)“menu
C
Select one of detected networks and
enter valid key.
Helpful hints:
 If you don’t have WiFi router select
“Peer to Peer (Ad-Hoc)” instead of
“Infrastructure (AP)“, then configure
settings (SSID, WEP key, Ariva IP address)
 WiFi networks are usually slower than
cable (Ethernet) networks. It may affect
playback performance.