elektraLite Elektrik Eye - Manual (Page 20)

-
１９ -
CLEANING AND MAINTENANCE
1. All bolts and safety chains must be tightly screwed into position and have no corrosion.
2. Regularly check all mechanic moving parts for wear. They must rotate freely and in no way stick or
squeak.
3. Regularly look for wear and tear on the 120 volt input cable and the DMX signal cable.
4. Clean
Elektric Eye at frequent intervals. Use a moist lint free cloth. Do not use a wet cloth or a cloth
with alcohol or solvents added. Clean lens and the reflector when the lamp is off, disconnected from
the 120 supply and when it is cool.
TECHNICAL SPECIFICATIONS
Power supply : 120VAC, 60Hz
Power consumption : max. 400 VA
Lamp : MSD250/2 GY9.5 socket, Metal Halide
Motors : 8 micro motors
Packing dimensions :58cm x 42cm x 46cm [23” x17 ” x 18”]
Net weight : 16 KGS; 35 lbs
Gross weight: 19 KGS; 42 lbs.
[Errors and omissions for all information given in this manual is excepted.
All information is subject to change without prior notice].
Registering your Elektric Eye
It is very important that you register your Elektric Eye so that you can receive any updates and have your
warranty in operation. To register please fill in the warranty form which can be found at
www.myelektralite.com