elektraLite PaintCan 2.0 - Manual (Page 8)

- ７ -
Display Panel
The Display Panel offers several features: for example, you can simply set the starting address, run the
pre-programmed “shows” or reset the fixtures motors.
The main menu is accessed by pressing the Mode/esc-button until the display starts flashing. Browse
through the menu by pressing the Up-button or Down-button. Press the Enter-button in order to select
the desired menu. You can change the selection by pressing the Up-button or Down-button. Confirm
every selection by pressing the Enter-button. You can leave every mode by pressing the
Mode/esc-button . The functions provided are described in the following sections.
Default settings shaded.
Main functions