elektraLite Pancake RGBW 108-3W RGBW single source LEDs User Manual
Page 10
12
**
RGB
Macros
000-004 No
function
005-044
Red at max output then Green fading up and Red fading
down. Then Green fades down as Blue fades up. All are
out at 036 DMX. Then at 040 DMX Red & Blue at max
output. Both fade out by 044 DMX.
045-049 No
function
050-094
Chases through all 4 colors RGBW. The speed of chase
050 DMX VERY slow to 094 DMX VERY fast.
095-099 No
function
100-149
8 colors fading in and out. 100 DMX is the beginning
of a slow fade rate with 149 DMX ending at a fast fade
rate.
150-154 No
function
155-166
Red at 155 DMX, immediately at max output; followed
by Green fading up to max output which is reach at 166
DMX
167-178
Green at 167 DMX, is at max output; followed by Red
fading down to off at 178 DMX.
179-190
Green at 179 DMX, is at max output; followed by Blue
fading up to max output which is reached at 190 DMX.
191-202
Blue at 191 DMX is at max output; followed by Green
fading down to off at 202 DMX.
203-214
Blue at 203 DMX, is at max output; followed by Red
fading up to max output which is reached at 214 DMX
215-226
Red at 215 DMX, is at max output; followed by Blue
fading down to off at 226 DMX
227-238
Red at 227 DMXis at max output; followed by Blue &
Green fading up to max output for all at 238DMX.
239-250
Red at 239 DXM is off instantly at 239 DMX then Red
fades in from 240 DMX to 250 DMX. Green fades out
from 240 DMX to 250 DMX.
251-255
Red, Green and Blue at max output.
13
***
000-127 No
function
128-255
Random Auto
***
14
000-250251-255
No function Reset (after 3 seconds)
*
When operating the strobe may sure the master dimmer (channel 3) is set to 75% (190
DMX value). This is imperative in order that the strobe to work correctly
.
**
Make sure, before operating channel 12, that all colors [so channels
5 (red),
6 (green),
7
(blue)
and 8 (white)] are at zero. Make sure channel 3, the master dimmer, is "on"
(maximum, for example). Failure to do this will result in colors being combined and this
will result in differences in the colors across fixtures. It could also result in strobing and
resetting of fixtures as they will work in a random fashion.
***
This means that the automatic program is random and is not the same from fixture to
fixture. Each fixture has its own random program.