elektraLite eyeBall RGBWA (5-in-1) - Manual (Page 13)

17. DMX Channel Assignments (Cont.)
10 Speed control for Effects program 01-03 on channel 09. (000 stops the program. 255 is max speed for the program). 000-255
11 Dim 00 (straight line dimmer) 000-009
Dim 01 (dimmer curve 1. Shortest fade time) 010-069
Dim 02 (dimmer curve 2. 2 nd Shortest fade time) 070-129
Dim 03 (dimmer curve 3. 3 rd Shortest fade time) 130-189
Dim 04 (dimmer curve 4. Longest fade time) 190-255
12 All fixtures are address 000
ID 01 through 255 correspond to dmx addresses 001 through 255 respectively 001-255
18. Cleaning and maintenance.
Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and many
companies and installations do just that. However the net result is, no matter what the fixture, premature
failure!
Changing the oil in a car most people do on a regular basis.
So with the fixtures regular maintenance it an excellent practice, if you want the fixtures to last.
So what is the maintenance for the fixture?
Clean the fan! That’s really it!
Turn off the ElektraLite eyeBall (5-in-1).
Using a small vacuum cleaner, suck the dust and “fur balls” out.
Do not use a can of co². That will just blast the dust and dirt everywhere!
The fans keep the LEDs cool and keep the electronics cool too.
Without the fans working efficiently and dust free, the fixtures will fail and that will be a lot more costly than
having someone vacuum the fixtures on a regular basis.
How often should the fans be cleaned? It depends on where the fixtures are; in a very dusty atmosphere
once a week. So check the fan on a regular basis, it may not need cleaned every week but a quick “visual
inspection” should be done.
The clear front plastic cover for the lenses should be cleaned so the light output is maintained. With the
ElektraLite eyeBall (5-in-1)
turned off, use only a moist lint-free cloth, and clean the plastic cover. Never
use alcohol or solvents to clean the fixture. Never spray anything onto the fixture at the front or in any place
on the fixture.
19. Technical Specification.

Operating voltage 100 – 250v
 Frequency 50 – 60 Hertz
 7 x quad 10watt leds
 80 VI
 Fan cooled
 162.5mm x 162.5mm x 218.5mm
 6.5" x 6.5" x 8.6"
 2.1 kgs
 4.6 pounds
ElektraLite is a division of Group One. Group One and its divisions are constantly improving their
product range and we reserve the right to make changes without prior notice.