AccuTemp EVOLUTION ELECTRIC STEAMER - Manual (Page 20)

MP4008-0910 EVOLUTION STEAMER OWNERS MANUAL
Page 18
Steamer won’t come on
 Verify that the steamer is plugged in to the proper outlet.
 Verify that the breaker is turned on.
 If the “High Water” warning light is on open the drain valve and drain the water until the
light goes out.
 Verify that the float is in place.
Steamer doesn’t heat
 If the operator’s display doesn’t light up, See section“ Steamer won’t come on”.
 Verify the steamer door is closed, as the heat won’t turn on if the door is open.
Steam comes out the door
 Verify that the door is completely closed and latched.
 Wait a minute to see if it stops. After the steamer refills with water it is normal for some
steam to come out the door for a brief amount of time, usually less than one minute.
Steamer Temperature is low
 When the steamer automatically refills the fresh water-cools the steamer off for a brief
period of time, but the steamer will reheat quickly.
If these don’t solve your problem contact our Technical Service Department .
 Phone - 800.480.0415 or 260.469.3040
 Email - [email protected]
 Web site - www.accutemp.net
SERVICE and TROUBLESHOOTING