AccuTemp EVOLUTION ELECTRIC STEAMER - Manual (Page 16)

MP4008-0910 EVOLUTION STEAMER OWNERS MANUAL
Page 14
CLEANING - CONNECTED MODELS
Warning: Do not use a water jet or pressure washer to clean the steamer
DAILY CLEANING
1) Turn the steamer off and wait for the steamer to cool.
2) Open the drain valve and allow the cooking compartment to drain completely. Remove
the pan racks, steam collector, overfill sensor and condensate tray for cleaning. Wipe
the inside of the cooking chamber, water sensors, pan rails, steam collector, overfill
sensor, and condensate tray with a clean cloth.
3) Re-install the overfill sensor, steam collector, pan rails and condensate tray. Leave the
door open overnight.
(NOTE: The steamer will not operate without the overfill sensor.)
WEEKLY CLEANING
1) Close the drain valve and add 1 cup (8 ounces or 0.24 liters) of white vinegar to the
cooking compartment. Start the steamer in the Cook Mode. The cooking compartment
will automatically fill with water. After 15 minutes, turn the steamer off and allow the
steamer to cool. Then open the drain valve and allow the water in the cooking chamber
to drain completely.
2) To rinse close the drain valve and start the steamer in the Cook Mode. The cooking
compartment will automatically fill with water. After 15 minutes turn the steamer off and
allow it to cool. Open the drain valve and let it drain completely.
3) Remove the pan rails, steam distributor, steam collector, overfill sensor and condensate
tray for cleaning. Clean the water sensors with a non-metallic cleaning pad.
4) Wipe the inside of the cooking chamber, water sensors, pan rails (Fig. 15), steam
distributor (Fig. 15), steam collector (Fig. 15), overfill sensor (Fig. 15), and condensate
tray with a clean cloth.
5) Install the overfill sensor and the steam collector , resting the steam distributor on top of
the steam collector align the 4 retaining fasteners and hand tighten, then install the pan
rails and the condensate tray. Leave the door open overnight.
6) (NOTE: The steamer will not operate without the overfill sensor)
Steam Distributor
Fig. 15
Over-Fill Sensor
Connected Model Only
Steam Generator Pan Rail Steam Distributor
OPERATION