A.J. Antunes & Co VCT-1000 9210719 - Manual (Page 2)

VERTICAL CONTACT TOASTER
2 P/N 1010930 Rev. C 09/13
General
The Vertical Contact Toaster, is designed for contact
toasting of buns. The toaster design allows the opera-
tor to place buns on both sides of the heated Platen
at the same time. Buns are placed into the top of the
toaster and uniform, golden brown, warm buns are then
retrieved from the bottom of the toaster in
approximately 15 seconds (VCT-1000) or 45 seconds
(VCT-50).
This manual provides the safety, installation, and oper-
ating procedures for the Vertical Contact Toaster. We
recommend that all information contained in this
manual be read prior to installing and operating the
unit.
Your Vertical Contact Toaster is manufactured from the
finest materials available and assembled to Roundup’s
strict quality standards. This unit has been tested at
the factory to ensure dependable trouble-free
operation.
OWNER INFORMATION
TABLE OF CONTENTS
IMPORTANT! Keep these instructions for future reference. If the unit changes
ownership, be sure this manual accompanies the equipment.
Warranty Information
Please read the full text of the Limited Warranty in this
manual.
If the unit arrives damaged, contact the carrier imme-
diately and file a damage claim with them. Save all
packing materials when filing a claim. Freight damage
claims are the responsibility of the purchaser and are
NOT covered under warranty.
The warranty does NOT extend to:
• Damages caused in shipment or damage as
result of improper use.
• Installation of electrical service.
• Normal maintenance as outlined in this manual.
• Malfunction resulting from improper maintenance.
• Damage caused by abuse or careless handling.
• Damage from moisture into electrical
components.
• Damage from tampering with, removal of, or
changing any preset control or safety device.
Owner Information .....................................................2
General ......................................................................2
Warranty Information .................................................2
Service/Technical Assistance ....................................3
Important Safety Information ....................................4
Specifications .............................................................5
Electrical Ratings .......................................................5
Electrical Cord & Plug Configurations .......................5
Dimensions ................................................................5
Model Designation .....................................................5
Installation ...................................................................6
Unpacking ..................................................................6
Equipment Setup .......................................................6
Assembling the Unit ..................................................6
Operation .....................................................................8
Operating Instructions ...............................................8
Safety Features .........................................................8
Maintenance ................................................................9
Daily ...........................................................................9
Replacing the Black and Silver Release Sheet .........9
Checking the Conveyor Belt Chains .......................10
Replacing the Spring Tensioners .............................11
Troubleshooting .......................................................12
Wiring Diagram .........................................................14
Replacement Parts ...................................................15
Limited Warranty ......................................Back Cover