Amana VR8205 - Manual

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to
know the product better than the customer. This
includes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize
yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during installation
or repair it is possible to place yourself in a position
which is more hazardous than when the unit is in
operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct
a customer in its safe use.
Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual should
not supersede existing practices but should be
considered as supplemental information.
Amana
Fayetteville, TN 37334
A higher standard of comfort
Heating ¡ Air Conditioning
®
October 1997(1) 10759818
Amana Forced Air Central Furnace Design Complies With Requirements
Embodied in The American National Standard / National Standard of Canada
Shown Below.
ANSI Z21.47•CAN/CGA-2.3 Central Furnaces
GUI* & GCI*
Gas Fired Warm Air
Furnace
Installation Instructions
Affix this manual, Specification Sheet and Users
Information Manual adjacent to the furnace.
Table of Contents
To The Owner .............................................................................. 2
To The Installer ............................................................................ 2
I. Safety and Unit Location ..................................................... 3
II. General Information ............................................................. 4
III. Air Requirements ................................................................. 4
IV. Category I Venting (Vertical Venting) ................................. 6
V. Masonry Chimneys .............................................................. 8
VI. Gas Piping .......................................................................... 12
VIl. Electrical Wiring ................................................................. 16
VIlI. Circulating Air and Filters ................................................ 18
IX. Sequence of Operation (Integrated Ignition Control) .... 21
X. Start-Up, Adjustments, and Checks ................................ 21
XI. Maintenance ....................................................................... 27