Nikon SF-210 Slide Feeder Adapter - Manual (Page 27)

9-En
The Slide Feed Slot
In most cases (for example, when scanning slides with mounts of different thicknesses), the slide
feeder works best with the slide feed slot fully open.
SF-210 slide feeder
(viewed from above)
SF-210 slide feeder
(viewed from above)
Feeder adjustment plate
Slide feed slot
Slide
Feeder adjustment dial
Feeder adjustment
plate
Scanning Slides of the Same Thickness
If the mounts are all the same thickness, the slide feed slot should be about one-and-a-half
times the thickness of the slide mount (see illustration below). This will help prevent the feeder
from jamming or feeding several slides at once
The width of the slide feed slot is controlled by the feeder adjustment dial.