Nikon D3200 - Manual (Page 79)

63
t
Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera, making pictures brighter or darker. It is most effective when used with
M (Center-weighted metering) or N (Spot metering) (0 60). Choose from values
between –5 EV (underexposure) and +5 EV (overexposure) in increments of
1 /
3
EV. In
general, positive values make the subject brighter while negative values make it
darker.
1
Place the cursor in the information display.
If shooting information is not displayed in
the monitor, press the
P button. Press the
P button again to place the cursor in the
information display.
2
Display exposure compensation options.
Highlight exposure compensation in the
information display and press
J.
3
Choose a value.
Highlight a value and press J. To return to
shooting mode, press the shutter-release button
halfway.
Normal exposure can be restored by setting exposure compensation to ±0. Exposure
compensation is not reset when the camera is turned off.
–1 EV No exposure compensation +1 EV
P button Information display