American Audio Pro-Scratch 2 - Manual (Page 26)

PITCH ADJUSTMENTS
© American Audio ® - www.americandj.com - Pro-Scratch 2™ Instruction Manual Page 26
PARAMETER TIME
PARAMETER RATIO
EJECT
POWER
CUE 1 2 3 4 5 6 7 8 9 0
RELOOP
SINGLE
LOOP
REMAIN
NONSTOP
TOTAL ELAPSED
M T S
PROGRAM
LOCK KEY SYNC. BEAT
F PITCH BPM
CUE AUTO BPM
OFF
ON
FX MIX
BOP
ENTER
PAN FLANGER SKID PHASE
FX SELECT SGL/CTN
TIME REV.PLAY
TEMPO
LOCK 4%/8%/16%
TRANS ECHO SCRATCH FILTER HOLD
ON/OFF
SAMPLE PITCH
Figure 48
3. JOG WHEEL (16):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode
Rotating the wheel in a clockwise direction will increase your track pitch and
rotating the wheel in a counter-clockwise direction will slow your track pitch.
The speed you rotate the JOG WHEEL will determine pitch bend percentage
(%). For example, if the JOG WHEEL is continuously turned in a counter-clock-
wise direction the playback speed will steadily decreases and will continue to
decrease until playback reaches a maximum of -100% and playback stops
entirely. When you stop turning the JOG WHEEL the disc speed will automati-
c
ally return to it’s previous set speed.
NOTE: To use the JOG WHEEL in a pitch bend function when the
SCRATCH EFFECT (6) is activated you must use the outer ring of the jog
wheel where the clear rubber insulator is attached.