beautypg.com

American Audio Pro-Scratch 2 User Manual

Page 13

background image

©

American Audio

®

- www.americandj.com - Pro-Scratch 2™ Instruction Manual Page 13

GENERAL FUNCTIONS AND CONTROLS (Cont.)

D. LCD DISPLAY PANEL (FIGURE 6)

44. PLAY INDICATOR -

This indicator will glow

when the unit is in play mode.

45. EFFECT INDICATOR -

This indicator glows

when any of the nine built-in effects are selected.

46. SINGLE INDICATOR -

This indicates that the

CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi-
cator is not on the unit is in continuous mode In
continuous mode the drive will play all the remain-
ing tracks on the disc. Once the remaining tracks
have ended the unit will return to cue mode

47. LOOP -

This icon will flash when you are in

loop mode. This icon will glow when a loop has
been created but is not actively playing.


48. RELOOP INDICATOR -

Appears when LOOP

is engaged or ready to be engaged.

49. PAUSE INDICATOR -

This indicator will glow

when the drive is in pause mode.

50. TRACK INDICATOR -

This indicator describes

which track is currently cued or is playing.

51. CUE INDICATOR -

This indicator will glow

when the unit is in CUE or mode and will flash
every time a new CUE POINT is set.

52, 53, 54. TIME METERS -

These indicators will

detail the current Minutes, Seconds, and Frames.
The meter will display either the elapse, total, or
remaining time of a track or the entire disc. The
display time will depend on the selected time func-
tion. The selected time function will be displayed
above the TIME METER as TOTAL REMAIN (58),

REMAIN (58) OR ELAPSE (59).

55. MEMORY BUCKET INDICATOR -

This indi-

cator serves two functions. The red bucket out-
line details the cue memory status, a full bucket
outline indicates the cue memory is full. The five
bars in the memory bucket detail the anti-shock
memory state. Each bar indicates 2 second of
digital anti-shock

56. PITCH METER -

This meter will display either

the pitch percentage applied by the PITCH SLID-
ER (33).

57. TIME BAR INDICATOR -

This bar gives a

visual approximation of a track's or disc's time
This bar will begin to flash when a track is end-
ing. The flashing bar is great reminder, that time
is running out to get that next track ready to go.

58. LOCK INDICATOR -

This indicates the unit

control are in lock mode, see page 23.

59. P.S.P. INDICATOR -

This indicates which, if

any, of the effect presets is in use.

60. TOTAL/REMAIN INDICATOR -

When TOTAL

is indicated in the LCD DISPLAY (19) the TIME
DESCRIBED (52, 53, & 54)

in the LCD (19)

will define the total disc remaining time. When
REMAIN is indicated in the LCD DISPLAY (19)
the TIME DESCRIBED (52, 53, & 54) in the LCD
will define the current track's remaining time.


61. ELAPSE INDICATOR -

When this indicator

is on it will define the time displayed in the TIME
METER (52, 53, & 54)

as the current track’s

elapse time.

88

00

:00 00

160

EFFECT

ELAPSED

SINGLE

TOTAL REMAIN

CUE

T

M

S

F

LOOP

RELOOP

.

--

50

52

53

54

55

56

51

49

60

61

58

48

47

46

45

44

Figure 6

0

59

LOCK

57