Vibration reduction, G vibration reduction, A 102) or – Nikon L100 User Manual
Page 114: A 102), A 102) to, A 102) setting a, A 102) setting and hold, A 102
102
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, Playba
ck an
d
Se
tu
p Me
nu
s
g Vibration reduction
Specify the vibration reduction setting for shooting still pictures. Vibration
reduction effectively corrects blur that commonly occurs when shooting with
zooming or at slow shutter speeds.
Turn vibration reduction off when using a tripod to stabilize the camera during
shooting.
The vibration reduction setting can be confirmed on the monitor during shooting
(When it is set to Off, nothing is displayed) (
Press the d button M z (Setup menu) (A 92) M g Vibration reduction
On (default setting)
Vibration reduction is enabled.
Off
Vibration reduction is not enabled.
B
Notes on Vibration reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed on the camera’s
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shaking in some
situations.
D
Using Vibration Reduction with Movies
When recording movies, electronic vibration reduction is used automatically to reduce the effects of
camera shake.