Nikon P530 - Manual (Page 130)

Refe
re
nce Se
cti
o
n
E 14
3
Press and hold down the
c button
to turn on the camera.
• Images are displayed on the TV.
• The camera monitor does not turn on.
B
If Images Are Not Displayed on the TV
Make sure that TV settings (
E70) in the setup menu conforms to the standard
used by your TV.
C
Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to select images,
start and pause movie playback, switch between full-screen playback mode and
four-image thumbnail display, etc.
• Set HDMI device control ( E70) of TV settings to On (default setting) in the
setup menu, and then connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.