Nikon 2500 - Manual (Page 88)

76
Camera Setup
Restoring Default Settings: Reset All ( Mode Only)
Reset All is used to reset settings to their default
values. This option is only available in the SET-UP
menu for
mode, but resets settings for all
modes.
Choosing Reset restores the settings listed below to their default values.
RESET ALL
Reset all settings
to default values
No
Reset
MENU SELECT SET OFF
Resetting File Numbering to 0001
To reset file numbering ( 49) to 0001, select Reset All after either deleting
all pictures ( 87) or formatting the memory card ( 72).
Choosing Reset also clears the current file number ( 49) from memory.
Numbering will continue from the lowest number available on the memory
card. All other settings are unaffected.
Default Setting Default Setting
±
0 Exposure compensation
Single Continuous
Off Best Shot Selector
Auto Image sharpening Auto White balance
3 Monitor brightness
30 s Auto off
Option Description
No Exit menu, leaving settings unchanged.
Reset Restore settings to default values.