Nikon D2HS - Manual (Page 217)

203
Menu Guide—The Setup Menu
LCD Brightness
To adjust monitor brightness, highlight LCD
brightness in the setup menu (
201) and press
the multi selector to the right. The menu shown
at right will be displayed. Press the multi selector
up to increase brightness, down to decrease. The
num ber to the right of the dis play indicates the
cur rent bright ness level, with +2 the brightest setting and –2 the darkest.
Press the multi selector to the right to complete the operation and return to
the set up menu.
Mirror Lock-up
This option is used to lock the mirror in the up
position to allow inspection or cleaning of the
low-pass fi lter that protects the image sensor.
See “Technical Notes: Caring for the Camera”
(
244). When an optional EH-6 AC adapter
is connected, Mirror Lock-up will be available
in the setup menu (
201). Highlighting this option and pressing the multi
selector to the right displays the menu shown above. If the multi selector is
pressed to the right again, a row of dashes (“– – – – – – ”) will be displayed
in the top control panel. To raise the mirror, press the shutter-release button.
The mirror will be locked in the up position the row of dashes will blink. The
mirror will be lowered when the camera is turned off.