Nikon D2HS - Manual (Page 212)

198
Menu Guide—Custom Settings
Custom Setting f5: Customize Command Dials
This option controls the operation of the main
and sub-command dials. Highlight f5 Command
dials in the second level of the CSM menu (
170) and press the multi selector to the right.
Press the multi selector up or down to highlight an
option, then press the multi selector to the right.
Option Description
Rotate
direction
Controls direction of command dials when setting
fl exible program, shutter speed, easy exposure
compensation, exposure mode, exposure compen-
sation value, bracketing increment, and fl ash sync
mode. Press multi selector up or down to highlight
option, press to right to select:
• Normal (default): Normal command dial operation.
• Reverse: Reverses rotation of command dials.
Change
Main /
Sub
Exchanges functions of main and sub-command
dials when setting shutter speed and aperture.
Press multi selector up or down to highlight op-
tion, press to right to select:
• Off (default): Main command dial controls shut-
ter speed, sub-command dial controls aperture.
• On: Main command dial controls aperture, sub-
command dial controls shutter speed.
Aperture
setting
Controls whether changes to aperture are made
using lens aperture ring or command dials. Re-
gardless of setting chosen, lens ring must be used
to set aperture for non-CPU lenses, command dials
to set aperture for type G lenses not equipped with
aperture ring. Press multi selector up or down to
highlight option, press to right to select:
• Sub-command dial (default): Aperture can only be adjusted with sub-
command dial (or main command dial if Change Main/Sub is On).
• Aperture ring: Aperture can only be adjusted using lens aperture ring.
Camera aperture display shows aperture in increments of 1 EV. This op-
tion is selected automatically when non-CPU lens is attached.