Nikon S230 - Manual (Page 32)

20
First Ste
p
s
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
2
Tap the desired language.
If the desired language is not displayed, tap
R or S to
view other language options.
For more information about operating the touch panel,
see “Operating the Touch Panel” (
A 7).
.
3
Tap Yes.
If No is tapped, the date and time will not be set.
4
Tap
C or D to select your home time zone
( A 132) and tap g.
D
Daylight Saving Time
If daylight saving time is in effect, tap W in the time zone selection
screen displayed in step 4 to turn on the daylight saving time
option.
When the daylight saving time option is enabled, W glows yellow.
To turn off the daylight saving time option, tap W again.
Language
No Yes
Set time and date?
Date
London
Casablanca
London
Casablanca