Nilfisk-ALTO CR 1500 - Manual (Page 28)

GENERAL MACHINE MAINTENANCE
FIGURE 23
LUBRICATION
100 Hour Lubrication
1. Lubricate drive wheel swivel, wheel bearings and steering rack guide.
2. Lubricate front wheel bearings.
3. Lubricate all moving joints.
4. Lubricate all 6 (Diesel)/4 (Gas/LP) DANHOUSER Bushings with NAPA #765-1363 or equivalent anti-seize lubricant. The bushings are located
on the steering, scrub deck lift, squeegee lift, main broom lift, both threaded ends of the throttle cable and the variable dump door cylinders.
250 Hour Lubrication
5. Lubricate squeegee casters.
6. Lubricate governor linkage (Diesel).
Use good grade multipurpose grease. Avoid using too much grease.
6
3
4
2
4
3
5
1
4
A-28 / ENGLISH
A-28 - FORM NO. - 56041719 - CR 1500