Asus A7N266-E - Manual (Page 30)

30 ASUS A7N266-E User’s Manual
3. HARDWARE SETUP
ACR-A6CH card
3. H/W SETUP
ACR-A6CH Hardware Installation Procedure
1. Power OFF your computer.
2. Carefully align the ACR-A6CH card’s connector to the ACR slot (PCI 6) and
press firmly so that the slot receives all the teeth evenly along the entire length
of the card.
3. Secure the ACR card onto the PC chassis with a chassis screw.
4. Connect the three black internal connectors (TAD, CD_IN, AUX_IN) with the
appropriate leads as required. Connect the external connectors to audio output
and recording devices as required.
NOTE: The card below is pictured front side up; ensure that the colored connectors
are positioned to face the outside edge of the motherboard.
A7N266-E
0 1 0 1 0 1
®
A7N266-E Advanced
Communication Riser (ACR)
IMPORTANT: Only the ASUS ACR-A6CH Audio Communications Riser card is
recommended for use with this motherboard in the ACR slot. It is impossible to
install another card in the adjacent PCI slot since they are using the same space.