Binding, Installation – Spektrum SPMA9590 User Manual
Page 4
EN
4
Binding
Please refer to your transmitter, receiver, STi
™
(SPMTR1000) or telemetry module
(TM1000) manuals for binding instructions. For sensor compatibility, please refer
to the item product page on spektrumrc.com or horizonhobby.com.
Installation
The High-Current Sensor is designed to easily install between any aircraft ESC
and battery using EC3
™
connectors. The sensor reports instantaneous amperage
and is capable of 60 continuous amps in the stock configuration (EC3 connectors
/13 AWG are a limiting factor).
The user will have 150-amp maximum capability when the wire leads are directly
soldered to the High-Current Sensor PCBA.
See also other documents in the category Spektrum Accessories communication:
- SPM1002 (16 pages)
- SPM1011 (20 pages)
- SPM1012 (20 pages)
- SPM1210 (1 page)
- SPM1300 (24 pages)
- SPM1305 (24 pages)
- SPM6100 (3 pages)
- SPM6070 (4 pages)
- SPM6000BR (2 pages)
- SPM6000 (2 pages)
- SPM6831 (8 pages)
- SPM6818 (8 pages)
- SPM6817 (2 pages)
- SPMAR9020 (72 pages)
- SPM9646 (24 pages)
- SPM9645 (24 pages)
- SPM9560 (3 pages)
- SPM9549 (13 pages)
- SPM9548 (13 pages)
- SPM9540 (28 pages)
- SPM9021 (2 pages)
- SPMAR6210 (44 pages)
- SPMAR6200 (2 pages)
- SPMAR6115E (40 pages)
- SPMAR6110E (2 pages)
- SPMAR610 (17 pages)
- AR600 (44 pages)
- SPMAR500 (2 pages)
- SPMAR400 (64 pages)
- SPMAR12200 (25 pages)
- SPMAR12120 (92 pages)
- SPMAR12100 (14 pages)
- SPMAR12020 (72 pages)
- SPMAR12010 (2 pages)
- SPMAR10000 (60 pages)
- SPMA9589 (8 pages)
- SPMA9587 (8 pages)
- SPMA9586 (8 pages)
- SPMA9584 (8 pages)
- SPMA9575 (8 pages)
- SPMA9574 (8 pages)
- SPMA3060 (8 pages)
- SPMA3030 (2 pages)
- SPMA3012 (39 pages)