Spektrum SPMAR12200 User Manual

Page 16

Output Mapping

The Output Mapping function allows the

output ports of the Cockpit to be assigned to

any of the 12 channels available. This allows

for customization of the advanced features

of the Cockpit. For instance, any of the 4 dual

ports can be assigned to any channel for servo

matching and the 6 sequencer channels can

be assigned to any channel desired.
To select the Output Mapping channels, complete the following steps:
1. After entering the Output Mapping function, move up and down through the

mapping function by pressing the I or II buttons on the SensorSwitch.

2. The A through L letters in the Output Mapping function correspond to the output

ports of the Cockpit. The channels in the Output Mapping correspond to the

channels of the transmitter.

3. To change an output port selection, press the SET button on the SensorSwitch to

select the output port desired.

4. Press the I or II buttons on the SensorSwitch to select the channel desired.

5. Press the SET button on the SensorSwitch to confirm the channel selected.

INIT Center Pos

The Initialize Center Position function is used to

set the center positions of each channel of the

transmitter. This is used for servo matching as

well as sequencing.
Complete the INIT Center Pos function before

setting up the servo matching and sequencer

for best results.
To select the Output Mapping channels, complete the following steps:
1. Move all transmitter sticks, pots, sliders and switches (where possible) to the

center positions.

2. With the cursor next to INIT Center Pos, press the SET button on the

SensorSwitch.

3. The center position of each channel is automatically set.

Power Manager

The Power Manager function is used to select

the chemistry type of the battery used, the

capacity of the battery pack, and the output

voltage to the servos.
Set the battery chemistry type, capacity of the

battery and the output voltage before setting the

rest of the functions on the Cockpit.

CAUTION: Ensure you select the correct battery type that you are using. Do not

use the NiMH battery setting while using a LiPo battery or the LiPo battery setting

while using a NIMH battery.
The default battery chemistry type is LiPo/Li-Ion. If this is the battery chemistry that

will be used, this step can be skipped.