Spektrum SPM1305 - Manual (Page 5)

5 SPEKTRUM TELEMETRY
Binding the Handheld Unit
It is necessary to bind the handheld unit to the transmitter. Binding
teaches the handheld unit the specific code of the transmitter and when
bound, the handheld unit will only listen to information coming from the
receiver(s) that are bound to that transmitter. To bind the handheld unit:
• Press and hold the  button while turning on the
handheld unit. The LED should flash continuously.
• With the transmitter in close proximity to the handheld, press
and hold the bind button on the transmitter while turning it on.
The LED on the transmitter should blink for several seconds.
When a successful bind is completed, the LED will go off on the
handheld unit and the LED will go solid on the transmitter.
Step 1: Press and hold the  button while turning on
the handheld unit.
Step 2: Press and hold the transmitter’s bind button while
turning on the transmitter