Blodgett KTT-DS Series - Manual (Page 7)

OM-KTT-DS 5
Inspection & Unpacking
CAUTION
AVOID NAILS AND SPLINTERS WHEN
REMOVING KETTLES FROM WOODEN
CRATES. WEAR SAFETY GLASSES.
The kettle will arrive completely assembled and wrapped in protective plastic,
strapped and bolted on a skid, enclosed in a cardboard crate. Immediately on receipt
remove the box and plastic wrap, and inspect the unit for damage. Report any
damage or an incorrect shipment to the delivery agent.
Write down the model number, serial number and installation date, and keep this
information for future reference. Space for these entries is provided at the top of the
Service Log in the back of this manual.
When installation is to begin, cut the straps holding the unit on the skid. Lift the unit
straight up off of the skid.
CAUTION
UNIT WEIGHS 40 TO 125 LBS (18 TO 61 KG).
FOR SAFE HANDLING, INSTALLER SHOULD
GET HELP AS NEEDED, OR USE
MATERIALS HANDLING EQUIPMENT
(e.g., FORT LIFT, DOLLY OR PALLET JACK)
TO REMOVE THE UNIT FROM THE SKID AND
PLACE IT FOR INSTALLATION.
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT.