Allied Telesis Uplink Module - Manual (Page 3)

Quick Install Guide 3
C613-04022-01 REV D
Models Covered By This Guide
This Quick Install Guide includes information on the following models:
■ AT-A35/SX
■ AT-A35/LX
■ AT-A39/T
The latest Quick Install Guide can be found at www.alliedtelesyn.co.nz/
support/support.html.
Compatible Switch Units
Uplink Modules can be used with all Rapier Switches and all AR800 Modular
Switching Routers.
Package Contents
The following items are included with each Uplink Module. Contact your sales
representative if any items are damaged or missing.
■ One Uplink Module.
■ One Uplink Module Quick Install Guide.
■ One warranty card.
Installing an Uplink Module
Follow these steps to install an uplink module:
1. Before installing an Uplink Module, read the safety information.
For safety information, see the Safety and Statutory Information booklet for
your switch. A copy of this booklet is supplied with each switch, and can
also be found at www.alliedtelesyn.co.nz/support/support.html.
AT-82xx Expansion Modules are not compatible with AR800 Series Modular
Switching Routers or Rapier Switches. Attempting to install an AT-82xx
Expansion Module into an AR800 Series Modular Switching Router or Rapier
Switch may damage the base-unit and Expansion Module. If you are unsure of
a Module’s compatibility, before installing it, contact an authorised Allied
Telesyn distributor or reseller.