Allied Telesis AT-9800 SERIES - Manual (Page 10)

10 AT-9800 Series
C613-04038-01 REV D
6. Log in
At the log in prompt, enter the log in name and password.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure
the switch.
To ensure configuration settings are saved correctly, use the GUI pages’ menus and
buttons to navigate, not your browser’s buttons.
As a security precaution, change the password as soon as possible.
To change the password, select Management > Users from the sidebar
menu. Select the Manager account and click Modify.
7. To access context-sensitive help
Click on the Help Button [Help] on each page.
System LEDs
Table 2: System LEDs for AT-9800 Series switches.
LED State Function
PWR
(Power)
Green The switch is receiving power
Fault Red The switch or management software is malfunctioning
1 Flash A switch fan has failed or is operating below the
recommended speed
2 Flashes If RPS monitoring is enabled, an RPS fan has failed or is
operating below the recommended speed
3 Flashes If an RPS is connected, the switch’s PSU (Power Supply
Unit) has failed
4 Flashes If RPS monitoring is enabled, the RPS PSU has failed
5 Flashes If RPS monitoring is enabled, an RPS is not connected or
is not operational
6 Flashes The switch’s temperature has exceeded the
recommended threshold
RPS (Redundant
Power Supply) Green An RPS is connected to the switch and is receiving
power
CompactFlash
Activity
(Rear panel) Green The compact flash memory is active. Do not eject the
flash memory module