Auto Page RF-350 - Manual (Page 7)

7
ALARM FEATURE “B” PROGRAMMING:
1
Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 5 times and hold in on the 5
th
push. When a
long chirp is heard, release the valet switch. You are now in the
Alarm feature ‘B’ programming mode.
3 Press the transmitter button corresponding to the feature you want to
program.
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps will confirm exit.
Press
Transmitter
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three
pulses
Four Chirps /
LED four pulses
1
Pathway
illumination
feature “off” Parking light
turns “on” for
30- second
upon an unlock
signal Parking light
turns “on” for
30- second
upon an unlock
signal & 10-
second upon a
lock signal.
2
Ignition
controlled door
locks & unlocks
Ignition
controlled door
locks only
Ignition
controlled door
unlocks only
Without ignition
controlled door
locks & unlocks
3 0.8-second Door
lock pulses.
3.5-second
Door lock pulse.
Double pulse
unlock
Comfort feature
4
2
nd
Channel
Pulsed
2
nd
Channel
Momentary
5 +
Button =
Silent Arm/Disarm
Button = 3 rd
Channel Aux.
6 +
H2/8 Gray Wire =
Trunk (Channel 2)
Output H2/8 Gray Wire =
Two Step Door
Unlock Output
7. +
Horn chirp
Duration
Standard
Horn chirp
Duration
50 mS
Horn chirp
Duration
30 mS
Horn chirp
duration
10 mS